Description
This kit has the throttle shaft. top cover seal, four steel washers for the bolts that hold the cover on, and two o-rings for the throttle shaft
Please note: these may be supplied with an O ring instead of a pre-formed rubber seal depending on stock
This kit is for solving fuel leaks from where the throttle shaft enters the top cover of the pump. Sometimes only the O rings need replacing and we sell these separately. These leaks tend to be more noticeable in cold weather, and can allow fuel to run back to the tank making the engine difficult to start without priming the pump. In some circumstances, the top cover itself can be badly worn and will need replacing, as no separate bush is fitted to these. We can supply this but please ask for a quote with your pump number.
This kit is specifically for Land Rover DPS applications with pump number 8520A060A and includes part numbers 375, 285, 294A and 270 in the exploded diagram.
This DPS pump is commonly fitted to 2.5D Land Rover 90 and 110 models from the mid eighties with engine codes 11J, 12J, 13J, 14J and 15J. If you require the kit for the turbo engine these are also available HERE
